Get Your Free Minnesota Window Tint Laws Guide

Understanding Minnesota Window Tint Regulations

Minnesota has specific laws that regulate how dark window tint can be on vehicles. These rules exist primarily for safety reasons, as law enforcement and other drivers need to see into vehicles clearly. Window tint darkness is measured using a metric called Visible Light Transmission (VLT), which indicates what percentage of light passes through the tinted window. In Minnesota, the allowable darkness levels vary depending on which windows you're tinting.

Get Your Free West Virginia Workforce Weekly Claim Guide →

For sedans and passenger vehicles, Minnesota law states that the windshield cannot have tint applied to it, with one exception: a non-reflective tint strip at the top of the windshield is permitted, but only up to 4 inches from the top. This strip exists so drivers can reduce sun glare in their line of sight while still maintaining visibility for those outside the vehicle. The front side windows (the windows closest to the driver and front passenger) must allow at least 50% of light to pass through, meaning the VLT rating must be 50% or higher. The rear windows and rear windshield have less strict requirements and may have a VLT of 35% or higher.

Different vehicle categories have slightly different rules. For example, pickup trucks and SUVs may have different specifications than standard sedans. Additionally, if your vehicle was manufactured with factory tint, that tint does not need to meet the same standards as aftermarket tint added later. Understanding these baseline rules helps vehicle owners know what modifications are permissible under Minnesota law.

Practical takeaway: Before having tint installed on your vehicle, measure the VLT percentage of the product you're considering. This number should be clearly labeled by the manufacturer. Check which windows you want to tint and verify that the product's VLT meets Minnesota's minimum light transmission requirements for each window location.

Medical Exemptions for Window Tint in Minnesota

Minnesota recognizes that some people have medical conditions that make standard window tint limitations problematic. Certain skin conditions, eye disorders, and photosensitivity conditions can be aggravated by sunlight exposure while driving. People with these conditions may be able to use darker window tint than what is normally permitted under state law, provided they have proper medical documentation and follow the correct procedures.

Learn About Quit Claim Deeds and How They Work →

To obtain a medical exemption for darker window tint, a person typically needs a written statement from a licensed physician or other qualified medical professional documenting the medical condition that requires additional sun protection. The documentation should explain why standard tint levels are insufficient and how darker tint would help manage the condition. Some examples of conditions that may warrant exemptions include severe lupus with photosensitivity, certain types of porphyria, severe vitiligo, or extreme sensitivity to ultraviolet light. However, documentation requirements can be specific, and each case is evaluated individually.

The medical exemption process in Minnesota generally involves submitting the physician's documentation to the Minnesota Department of Public Safety or providing it to law enforcement during a traffic stop. Drivers who have obtained a medical exemption may receive a certificate or notation in the vehicle registration system. It's important to understand that even with a medical exemption, the exemption is typically limited to a reasonable level of darkness—you cannot apply completely black tint simply because of a medical condition. The exemption allows for darker tint than standard regulations permit, but there are still practical limits.

Practical takeaway: If you have a medical condition that makes sun exposure difficult while driving, consult with your physician about whether your condition might warrant a medical exemption. Request written documentation from your doctor that specifically describes your condition and explains why darker window tint is medically necessary. Keep this documentation with you while driving, as you may need to present it to law enforcement if stopped.

Window Tint Reflectivity and Color Restrictions

Minnesota window tint law addresses not just darkness but also reflectivity. Reflective window tint can be distracting to other drivers and can interfere with visibility for law enforcement officers trying to see into a vehicle. State regulations limit how reflective window tint can be, and certain reflective or mirror-like finishes are prohibited entirely. Additionally, the color of the tint matters in Minnesota's legal framework.

Understanding Home Abandonment Laws and Options →

Reflectivity is measured differently than VLT. While VLT measures how much light passes through the tint, reflectivity measures how much light bounces off the tinted surface back toward the outside. Minnesota law typically specifies that window tint cannot be excessively reflective. For most standard window tint products, reflectivity is not a major issue, but specialty tints designed to create mirror-like effects or highly reflective finishes would violate these rules. The front side windows have stricter reflectivity limits than rear windows.

Regarding color, Minnesota does not prohibit specific tint colors outright in the way some states do. However, certain colors like red or amber on front windows can draw attention from law enforcement. The most common colors used for legal window tint are gray, bronze, and smoke (neutral tones). While blue or green tints are not explicitly banned, they can sometimes be seen as drawing unnecessary attention during traffic stops. Practical window tint products sold at legitimate shops typically come in colors that comply with regulations.

Practical takeaway: When choosing a window tint product, look for those marketed as "legal" or "compliant" in Minnesota, and ask the installer about both the VLT rating and reflectivity specifications. Neutral colors like gray and smoke are the safest choices if you want to avoid any question about compliance. Avoid any tint product advertised as having a mirror-like or highly reflective finish for front windows.

Common Violations and Law Enforcement Procedures

Window tint violations in Minnesota can result in traffic stops and citations. Law enforcement officers are trained to recognize window tint that appears darker than state law allows. Officers use handheld light transmission meters to measure the exact VLT of tinted windows during traffic stops. If a vehicle's tint is found to be darker than the legal limit, the driver may receive a citation. The penalty for window tint violations is generally treated as a minor traffic offense, though cumulative violations or repeated offenses might result in increased penalties.

Free Guide to Finding a Car Accident Lawyer in Rhode Island →

The typical citation for illegal window tint in Minnesota results in a fine, which can range from around $25 to $100 or more depending on the severity and whether the driver has prior violations. Beyond the financial penalty, the driver is usually given a timeframe to remove or lighten the tint and have the vehicle reinspected. Some jurisdictions may require proof that the tint has been removed or corrected before the violation is considered resolved. In some cases, drivers can contest window tint citations if they believe their tint is actually compliant, but this would require evidence such as an independent meter reading or documentation of a medical exemption.

It's important to understand that law enforcement in Minnesota treats window tint as a vehicle safety issue. Darker tint can make it harder for officers to see if occupants have weapons, which creates a safety concern during traffic stops. Additionally, excessively dark tint reduces visibility for the driver themselves during nighttime driving or in low-light conditions. Officers may also stop a vehicle for window tint that appears excessively reflective or if the tint appears to be applied in a way that creates visibility problems. Some officers may issue a warning for a first minor offense if the tint is only slightly darker than permitted.

Practical takeaway: Have your window tint checked using a professional light transmission meter before assuming it is legal. If you receive a citation for window tint, understand that you typically have a specific timeframe to correct the issue. Consult with the shop where your tint was installed about adjusting or removing it. If you believe your tint is legal and your citation is in error, you can request an independent measurement or bring documentation to traffic court.

Professional Installation and Product Standards

Window tint should be installed by professionals who understand Minnesota's regulations and can ensure the final product meets state requirements. Professional tint shops have the equipment and expertise to apply tint that meets specific VLT percentages. When choosing a shop, look for businesses that specifically mention they are familiar with Minnesota window tint laws and can document the VLT of the products they use. Reputable shops typically guarantee their work and will adjust or remove tint if it fails to meet legal standards.

Learn About Renewing Your Delaware Driver's License →

Quality window tint products vary significantly in price and longevity. Budget tint products may be less expensive but can bubble, fade, or peel over time. Mid-range and premium tint products offer better durability and color stability. Many professional tint shops offer warranties on their work, typically ranging from one to five years.